Support
Product Support & Owner Resources
Welcome to Hi Tech Air Solutions Customer Support.
Need help with your Air Reactor, replacement kits, maintenance, or troubleshooting?
For assistance, please contact our team:
Email: customerservice@hitechairsolutions.com
Phone: (405) 820-3762
Owner’s Manuals
Model 101 Owner’s Manual (PDF)
Model 110 Owner’s Manual (PDF)
Maintenance & How-To Videos
Reactor Pads and Filters Replacement
Maintenance & Care
Model 101 Maintenance Schedule
- Every 3 months: Replace filters and rotate reactor pads.
- Every 10–12 months: Replace reactor pads.
- Every 11–12 months: Replace both UVC-2 bulbs.
Replacement Kit Care
- Filters have clipped corners; reactor pads have square corners.
- The orange side of each reactor pad faces a bulb.
- Every three months, rotate the reactor pads one position: pad 1 to 2, pad 2 to 3, and pad 3 to 1, numbered from the fan side.


Refer to your owner’s manual for complete maintenance instructions. Contact Hi Tech Air Solutions before attempting electrical repairs or work involving internal wiring.
Setting Up Your Model 101
- Unpack and inspect. Keep the box in case the unit ever ships back to Hi-Tech.
- Install the UVC-2 bulbs. Hold by the base and slide in from the side. Never push straight in.
- Pick an open spot. Flat, level surface with a few inches of clearance. Not a closet or tight corner.
- Plug into a grounded outlet. 110–120V. No chains of extension cords or power strips.
- Switch to “I”. Both fans start within a few seconds. A steady, low hum is normal.
Refer to the Model 101 Owner’s Manual for complete setup and safety instructions.


Frequently Asked Questions
How much space does one Model 101 cover?
Each Model 101 is rated to cover up to 1,500 square feet in rooms with standard 8–9 ft ceilings. In spaces with ceilings taller than 9 ft, the rating is up to 800 square feet. Size each floor on its own, and each room closed off by doors separately.
Will I see the UV-C light?
No. The UVC-2 assembly is fully enclosed during normal operation, so there’s no visible light from the housing.
Is the Model 101 loud?
You’ll hear a steady, low fan hum, similar to a household air purifier or box fan.
Where should I place my unit?
In a central, open area with good airflow, on a flat, level surface. Avoid closets, tight corners, and walkways where it could be bumped.
Both bulbs look off. Is something broken?
The two bulbs are wired in series, so one failed bulb can make both look off. Contact Hi Tech Air Solutions for assistance identifying which bulb needs replacing.
Where can I purchase replacement parts?
Replacement kits are available directly from Hi Tech Air Solutions. Each Model 101 replacement kit contains four filters, two UVC-2 bulbs, and three reactor pads.
How often does the unit need maintenance?
Refer to the Maintenance & Care section above for the recommended replacement schedule and instructions.
What about returns and warranty coverage?
Refer to the original owner’s manual for the applicable return and warranty terms. Contact Hi Tech Air Solutions if you have questions about your coverage.
When to Contact Hi Tech
Contact Hi Tech Air Solutions for assistance with:
- Opening the equipment housing, wiring, or the UVC-2 assembly.
- Returns, warranty questions, and used or secondhand units.
- Sizing for vaulted ceilings, commercial spaces, or unusual layouts.
- Any question not answered by these resources.
Email: customerservice@hitechairsolutions.com
Phone: (405) 820-3762